In the previous topic, we have discussed the frequency of these criteria of software defined rating
system.
Now in this topic, we are going to cover that.
The new range criteria for the Asgeir selection, the signal to noise ratio is a very important aspect
in our communication system.
Suppose.
This is the noise floor and this is the main signal.
So this range is called dynamic range from the noise.
This is the noise and this is my signal strength.
So it should be as much as possible as it's to do the maximum so that my receiver can discriminate between
the noise level and between my signal level.
So that dynamic range is different on the several parameters.
One such parameter is the number of words used in the digital to analog converter.
Suppose I am using an easy distribution locomotor that what would not.
It will be sixty point two plus one point seventy six.
That comes to sixty one point ninety six maybe.
So the.
It's not of my sister will be sixty one point nine six.
Ideally speaking, but practically, there are different ways of just subcomponent.
This is not the case for that.
And it might come to a 45 degree.
So to get to continue the rage, we have to select the 14 or 16 days so that we get a good dynamic range
of the system and the extent certain newgrange is good.
I suppose this is the signal.
It has a good dynamic range and because of bad and so the signal is near, my receiver may not detect
the signal or the reception.
Quality of this signal will be what the receiver.
So for a good transmission and good reception, we have to increase the quality of transmission and
the quality of transmission can be increased.
Zinnia would destroy ADC so that the nuclides depends on the number of boots on the ADC and using a
higher DECIR deck we can increase the signal to noise ratio is not and ultimately we can increase the
dynamic range of the system.
In this topic, we have studied the range of the system that hold the transmission quality of the.